Download and Install Flexera ID-9 Key Drivers for Windows

October 2, 2017

If you are using Flexera ID-9 dongles to act as the ID for a floating license manager, or to lock software to the dongle, you will need to insure that the proper Windows drivers are installed. Otherwise the USB dongle will not be recognized and you will be unable to obtain a license.

What is a Flexera ID-9 Dongle?

A dongle is a serialized hardware key attached to a USB port on a computer. The dongle is used to limit or lock software access to whomever has the dongle attached to their computer system through the associated license file.

image of Flexera USB ID-9 Dongle

Driver Download Flex Dongle Drivers v7.5 39 MB (requires passwd)
Flexera Dongle FAQ Flexera Dongle FAQ - PDF 110KB

Install Instructions

Unzip the downloaded driver file into a new (temporary) directory.

The following files should appear:


Install the Drivers

Double click (execute) install.bat; the batch file will:

(for 64 bit Windows) copy

haspsrm_win64.dll --> C:\windows\System32

haspsrm_win32.dll --> C:\windows\SysWOW64


(for 32 bit OS) copy

haspsrm_win32.dll --> C:\windows\System32

Now from a command prompt run the haspdinst.exe with the -i option as shown below


You must reboot (restart) your computer for the driver installation to take effect.

You may also erase the temporary file where you unzipped the USB key drivers and batch files.

417 Ingalls St. Unit C, Santa Cruz, CA 95060 831.426.6163 email: